SPECIFICATIONS
| PRODUCT CODE | PRODUCT NAME | |
| 1509050100 | Drill Bit, Ø2.0, quick coupling, 2 pcs |  |
| 1500180100 | Drill Bit, Ø2.5*112mm, quick coupling, 2 pcs |  |
| 1500180300 | Drill Bit, Ø3.5*112mm, quick coupling, 2 pcs |  |
| 1500180200 | Drill Bit & Slide Limited Device, Ø2.8*165mm, quick coupling, 2 pcs |  |
| 1500102100 | Odonto tenaculum |  |
| 1500101700 | Extractor, Upper limbs, for Broken Screws |  |
| 1500182600 | Screwdriver, T8, Torx, quick coupling with (00.150.01824) Torque limited device 0.8N for 2.7 locking screw insertion |  |
| 1500182700 | Screwdriver, T15, Torx, quick coupling with (00.150.01825) Torque limited device 1.5N for 3.5 locking screw insertion |  |
| 1500182900 | Screwdriver, SW2.5, Hex, quick coupling with (00.150.01808) straight handle |  |
| 1500180400 | Tap, HB4.0, quick coupling for cancellous screw |  |
| 1510100500 | Tap, HA3.5, quick coupling for cortical screw |  |
| 1500102200 | Template, Upper limbs |  |
| 1500180800 | Straight Handle |  |
| 1500182300 | Threaded drill guide, Ø2.8, 2 pcs |  |
| 1500182200 | Threaded drill guide, Ø2.0 |  |
| 1500182100 | Screw holding clamp, coupling with (00.150.01827) T15 screwdriver for 3.5 locking screw |  |
| 1500182000 | Screw holding clamp, coupling with (00.150.01826) T8 screwdriver for 2.7 locking screw |  |
| 1500180700 | Periosteal elevator, 6mm |  |
| 1505710700 | Screwdriver, T8, Torx for 2.7 locking screw extraction |  |
| 1505710800 | Screwdriver, T15, Torx for 3.5 locking screw extraction |  |
| 1500180500 | Screwdriver & screw clamp, SW2.5, Hex |  |
| 1500182400 | Torque limited device, 0.8N, quick coupling with (00.150.01808) straight handle |  |
| 1500182500 | Torque limited device, 1.5N, quick coupling with (00.150.01808) straight handle |  |
| 1500181700 | Extractor, SW2.5 for skid screws |  |
| 1500181600 | Countersink drill, SR3, quick coupling |  |
| 1500181000 | Depth gauge, Upper limbs |  |
| 1500181500 | Plate bender, Upper limbs |  |
| 1500181100 | Retractor, Upper limbs, big |  |
| 1500181200 | Retractor, Upper limbs, small |  |
| 1500181900 | Screw holder |  |
| 1500100500 | Compression drill guide, Ø2.5 |  |
| 1500120600 | Double head drill guide Ø2.5＆ØHA3.5 |  |
| 1500180600 | General drill guide, Ø3.5 |  |
| 1500181300 | Reduction forceps, curved, Upper limbs |  |
| 1500181400 | Sharp head reduction forceps, Upper limbs |  |
| 1500101300 | Self centering bone holder, Upper limbs |  |
| 1500180900 | Plate cutter, small |  |
| Product Code | Data 2631 | Length(mm) |
| 11124-022 | 4 holes | 22.5 |
| 11124-025 | 4 holes | 25 |
| 11124-027 | 4 holes | 27.5 |
| 11124-030 | 4 holes | 30 |
| 11124-032 | 4 holes | 32.5 |
| 11124-135 | 6 holes | 35 |
| 11124-137 | 6 holes | 37.5 |
| 11124-140 | 6 holes | 40 |
| 11124-142 | 6 holes | 42.5 |
| 11124-145 | 6 holes | 45 |
| PRODUCT CODE | PRODUCT NAME | |
| 1500382300 | Drill bit & slide limited device, Ø4.3, quick coupling, 2pcs |  |
| 1509050400 | Drill bit, Ø3.2, quick coupling, 2pcs |  |
| 1509050700 | Drill bit, Ø4.5, quick coupling, 2pcs |  |
| 1510110500 | Tap, Ø4.5 |  |
| 1500102100 | Odontotenaculum |  |
| 1500382100 | Screwdriver, T25, Torx, quick coupling with (00.150.03820) Torque limited device 3.5N for 5.0 locking screw insertion |  |
| 1500380400 | Screwdriver, SW3.5, Hex, quick coupling with (00.150.01808) straight handle |  |
| 1500111700 | Extractor, Lower limbs for broken screws |  |
| 1500380600 | Depth gauge, Lower limbs |  |
| 1500112200 | Template, Lower limbs |  |
| 1500380900 | Extractor, Lower limbs for skid screws |  |
| 1500381900 | Threaded drill guide, Ø4.3, 2pcs |  |
| 1500380500 | Screw clamp, coupling with (00.150.03821) T25 screwdriver for 5.0 locking screw |  |
| 1500380800 | Countersink drill, SR4 |  |
| 1500311400 | Plate bender, 2pcs |  |
| 1500301000 | Retractor, 16mm |  |
| 1500311000 | Retractor, 44mm |  |
| 1500380300 | Perioseteal elevator, 8mm |  |
| 1505810800 | Screwdriver, T25, Torx for 5.0 locking screw extraction |  |
| 1500380100 | Screwdriver & screw holding clamp, SW3.5, Hex |  |
| 1500180800 | Straight handle |  |
| 1500181900 | Torque limited device, 3.5N, quick coupling with (00.150.0180) straight handle |  |
| 1500382000 | Torque Wrench 3.5N |  |
| 1500110500 | Compression drill guide, Ø3.2 |  |
| 1500130600 | Double head drill guide, Ø3.2 & Ø4.5 |  |
| 1500380200 | General drill guide, Ø3.2 & Ø4.5 |  |
| 1500380700 | Sharp head reduction forceps, Lower limbs |  |
| 1500111100 | Reduction forceps, curved, Lower limbs |  |
| 1500111300 | Self centering bone holder, Lower limbs, 2pcs |  |
| Product Code | Data 2630 | Length(mm) |
| 11124-022 | 4 holes | 22.5 |
| 11124-025 | 4 holes | 25 |
| 11124-027 | 4 holes | 27.5 |
| 11124-030 | 4 holes | 30 |
| 11124-032 | 4 holes | 32.5 |
| 11124-135 | 6 holes | 35 |
| 11124-137 | 6 holes | 37.5 |
| 11124-140 | 6 holes | 40 |
| 11124-142 | 6 holes | 42.5 |
| 11124-145 | 6 holes | 45 |
| PRODUCT CODE | PRODUCT NAME | |
| 1500500100 | Drill bit with flexible shaft, Ø2.5 |  |
| 1500130100 | Drill bit, Ø2.5 |  |
| 1500140100 | Drill bit, Ø3.0 |  |
| 1500500200 | Drill guide, for drill bit with flexible shaft, Ø2.5 |  |
| 1500100900 | Depth gaugth |  |
| 1500500700 | Screwdriver, multi-axial, hex, SW2.5&screw holding clamp |  |
| 1500501100 | Ball spike, 2pcs |  |
| 1500100400 | Screwdriver, Hex, SW2.5&screw holding clamp |  |
| 1500500800 | Bone hook |  |
| 1500501800 | Mobile tip, curved |  |
| 1500501900 | Mobile tip, flat |  |
| 1500500300 | Bender, for reconstruction plate, 2pcs |  |
| 1500501000 | Sciatic Distractor |  |
| 1500100500 | Compression drill guide, Ø2.5 |  |
| 1500100600 | Double head drill guide, Ø2.5&HA3.5 |  |
| 1500100700 | Double head drill guide, Ø3.0&HA4.0 |  |
| 1500502100 | Template, straight |  |
| 1500512100 | Template, curved |  |
| 1500100200 | Tap, HA3.5 |  |
| 1500100300 | Tap, HA4.0 |  |
| 1500500900 | T-bone hook |  |
| 1500500400 | Bending forceps, for reconstruction plate |  |
| 1500500500 | Bone holder, small |  |
| 1500500600 | Bone holder, large |  |
| 1500502000 | Pelvic reduction forceps |  |
| Product Code | Data 2629 | Length(mm) |
| 11124-022 | 4 holes | 22.5 |
| 11124-025 | 4 holes | 25 |
| 11124-027 | 4 holes | 27.5 |
| 11124-030 | 4 holes | 30 |
| 11124-032 | 4 holes | 32.5 |
| 11124-135 | 6 holes | 35 |
| 11124-137 | 6 holes | 37.5 |
| 11124-140 | 6 holes | 40 |
| 11124-142 | 6 holes | 42.5 |
| 11124-145 | 6 holes | 45 |
| PRODUCT CODE | PRODUCT NAME | |
| 1501430800 | K-wire, triangle, Ø2.5*250, 2pcs |  |
| 1501430900 | K-wire, threaded, Ø2.5*250, 2pcs |  |
| 1501431000 | Cleaning pin, Ø2.5*280 |  |
| 1500150100 | Drill bit, Ø3.2, 2pcs |  |
| 1500600200 | K-wire depth gauge |  |
| 1500600500 | Compressor |  |
| 1500600700 | Power combination reamer |  |
| 1500600600 | General handle |  |
| 1500110900 | Depth gauge, for lower limbs |  |
| 1500601000 | Hammer |  |
| 1500110400 | Screwdriver, Hex, SW3.5&Screw holding clamp |  |
| 1500101800 | Screw holder |  |
| 1500600300 | K-wire guide |  |
| 1500110500 | Compression drill guide, Ø3.2 |  |
| 1500110600 | Double head drill guide, Ø3.2&HA4.5 |  |
| 1500600100 | Tap & sleeve, for lag screw |  |
| 1500110200 | Tap, HA4.5 |  |
| 1500600400 | Lag screw inserter |  |
| 1500600800 | 135°DHS angle guide |  |
| 1500600900 | 95°DCS angle guide |  |
| Product Code | Data 2628 | Length(mm) |
| 11124-022 | 4 holes | 22.5 |
| 11124-025 | 4 holes | 25 |
| 11124-027 | 4 holes | 27.5 |
| 11124-030 | 4 holes | 30 |
| 11124-032 | 4 holes | 32.5 |
| 11124-135 | 6 holes | 35 |
| 11124-137 | 6 holes | 37.5 |
| 11124-140 | 6 holes | 40 |
| 11124-142 | 6 holes | 42.5 |
| 11124-145 | 6 holes | 45 |
| PRODUCT CODE | PRODUCT NAME | |
| 1500720100 | Drill bit, Ø1.5, 2pcs |  |
| 1500720300 | Screwdriver, square head, 2pcs |  |
| 1500710500 | Double head periosteal elevator, 5mm |  |
| 1500700500 | Double head periosteal elevator, 3mm |  |
| 1500701200 | Sharp hook |  |
| 1500701100 | Skin hook, 2pcs |  |
| 1500700600 | Depth gauge, mini |  |
| 1500700700 | Retractor, large |  |
| 1500710700 | Retractor, medium |  |
| 1500180700 | Periosteal elevator, 6mm |  |
| 1500702000 | Quick coupling |  |
| 1500720700 | Retractor, small |  |
| 1500700800 | Plate bender, mini, 2pcs |  |
| 1500701000 | Mini screw holder |  |
| 1500700400 | Combined drill & tap guide, Ø1.5&HA2.0 |  |
| 1500700900 | Countersink drill bit, SR2.0 |  |
| 1500710200 | Tap, HA2.0 |  |
| 1500701300 | Plate bender |  |
| 1500701400 | Plate holder |  |
| 1500701500 | Reduction forceps with point |  |
| 1500701600 | Reduction forceps, curved |  |
| 1500701700 | Bone rongeurs |  |
| 1500701800 | Plate cutter |  |
| 1500701900 | Mini screw case |  |
| Product Code | Data 2627 | Length(mm) |
| 11124-022 | 4 holes | 22.5 |
| 11124-025 | 4 holes | 25 |
| 11124-027 | 4 holes | 27.5 |
| 11124-030 | 4 holes | 30 |
| 11124-032 | 4 holes | 32.5 |
| 11124-135 | 6 holes | 35 |
| 11124-137 | 6 holes | 37.5 |
| 11124-140 | 6 holes | 40 |
| 11124-142 | 6 holes | 42.5 |
| 11124-145 | 6 holes | 45 |
| PRODUCT CODE | PRODUCT NAME | |
| 1501430900 | Threaded K-wire, Ø2.5*250 |  |
| 1501440100 | Cannulated drill Ø5.0 & slide limited device |  |
| 1501440700 | Depth gauge, for K-wire, Ø2.5 |  |
| 1501401500 | Threaded drill guide |  |
| 1501440300 | Cannulated screwdriver, Hex, SW4.0 |  |
| Product Code | Data 2626 | Length(mm) |
| 11124-022 | 4 holes | 22.5 |
| 11124-025 | 4 holes | 25 |
| 11124-027 | 4 holes | 27.5 |
| 11124-030 | 4 holes | 30 |
| 11124-032 | 4 holes | 32.5 |
| 11124-135 | 6 holes | 35 |
| 11124-137 | 6 holes | 37.5 |
| 11124-140 | 6 holes | 40 |
| 11124-142 | 6 holes | 42.5 |
| 11124-145 | 6 holes | 45 |
| PRODUCT CODE | PRODUCT NAME | |
| 1509055300 | Drill bit, Ø2.4*100mm, quick coupling, 2 pcs |  |
| 1509053600 | Drill bit, Ø2.0*140mm, quick coupling, 2 pcs |  |
| 1509052100 | Drill bit, Ø1.8*100mm, quick coupling, 2 pcs |  |
| 1509053500 | Drill bit, Ø2.7*100mm, quick coupling, 2 pcs |  |
| 1501812200 | Tap, Ø2.4, quick coupling |  |
| 1501814600 | Tap, Ø2.7, quick coupling |  |
| 1501805200 | Screwdriver, Torx, quick coupling, 2 pcs |  |
| 1501803400 | Distracting hook, straight |  |
| 1501803500 | Distracting hook, curved |  |
| *1501804800 | Torque limited device, 0.8NM |  |
| 1501805500 | Screw holding clamp, Torx |  |
| *1501805600 | Screw holding clamp, Hex |  |
| 1501812100 | Drill guide, Ø2.0, 2pcs |  |
| 1501802100 | Drill guide, Ø1.8, 2pcs |  |
| *1501804900 | Handle, connecting with torque limited device 0.8NM |  |
| 1501804700 | Quick coupling handle, straight |  |
| 1501803000 | Depth gauge, Max 40mm |  |
| 1501805700 | Plate bender, left |  |
| 1501815700 | Plate bender, right |  |
| 1501803700 | Periosteal Elevator |  |
| 1501805000 | Screwdriver, Torx |  |
| 1501802400 | Double head drill guide Ø1.8& Ø2.4 |  |
| 1501805400 | Double head drill guide Ø2.0& Ø2.7 |  |
| 1501805800 | Bone holder, 2pcs |  |
| 1501805900 | 2.7 Screw case |  |
| 1501806000 | 2.4 Screw case |  |
| Product Code | Data 2625 | Length(mm) |
| 11124-022 | 4 holes | 22.5 |
| 11124-025 | 4 holes | 25 |
| 11124-027 | 4 holes | 27.5 |
| 11124-030 | 4 holes | 30 |
| 11124-032 | 4 holes | 32.5 |
| 11124-135 | 6 holes | 35 |
| 11124-137 | 6 holes | 37.5 |
| 11124-140 | 6 holes | 40 |
| 11124-142 | 6 holes | 42.5 |
| 11124-145 | 6 holes | 45 |
| PRODUCT CODE | PRODUCT NAME | |
| 1501800100 | Drill bit, Ø1.1, 2pcs |  |
| 1501800200 | Drill bit, Ø1.5 |  |
| 1501800500 | Tap, Ø1.5 |  |
| 1501801000 | Plate bender 1.5, 2pcs |  |
| 1501800700 | Screwdriver, Torx, quick coupling & screw holding clamp |  |
| 1501800300 | Drill guide, Ø1.1, 2pcs |  |
| 1501800800 | Screwdriver, Torx, T4 |  |
| 1501800900 | Screwdriver, Cross head |  |
| 1501800600 | Double head drill guide, Ø1.1 & Ø1.5 |  |
| Product Code | Data 2613 | Length(mm) |
| 11124-022 | 4 holes | 22.5 |
| 11124-025 | 4 holes | 25 |
| 11124-027 | 4 holes | 27.5 |
| 11124-030 | 4 holes | 30 |
| 11124-032 | 4 holes | 32.5 |
| 11124-135 | 6 holes | 35 |
| 11124-137 | 6 holes | 37.5 |
| 11124-140 | 6 holes | 40 |
| 11124-142 | 6 holes | 42.5 |
| 11124-145 | 6 holes | 45 |
| PRODUCT CODE | PRODUCT NAME | |
| 1505710100 | Drill bit, Ø2.0 |  |
| 1500720100 | Drill bit, Ø1.5, 2pcs |  |
| 1501801400 | Tap, Ø2.0 |  |
| 1501801800 | Plate bender 2.0, 2pcs |  |
| 1501801200 | Drill guide, Ø1.5, 2pcs |  |
| 1501801600 | Screwdriver, Torx, quick coupling T6& screw holding clamp |  |
| 1501801700 | Screwdriver, Torx, T6 |  |
| 1501801500 | Double head drill guide, Ø1.5 & Ø2.0 |  |
| Product Code | Data 2623 | Length(mm) |
| 11124-022 | 4 holes | 22.5 |
| 11124-025 | 4 holes | 25 |
| 11124-027 | 4 holes | 27.5 |
| 11124-030 | 4 holes | 30 |
| 11124-032 | 4 holes | 32.5 |
| 11124-135 | 6 holes | 35 |
| 11124-137 | 6 holes | 37.5 |
| 11124-140 | 6 holes | 40 |
| 11124-142 | 6 holes | 42.5 |
| 11124-145 | 6 holes | 45 |
| PRODUCT CODE | PRODUCT NAME | |
| 1509055100 | Drill bit, Ø1.8*100, 2pcs |  |
| 1509055300 | Drill bit, Ø2.4*100 |  |
| 1501802300 | Tap, Ø2.4 |  |
| 1501802700 | Plate bender 2.4, 2pcs |  |
| 1501802100 | Drill guide, Ø1.8, 2pcs |  |
| 1501802500 | Screwdriver, Hex, quick coupling, SW2.0 & screw holding clamp |  |
| 1501802600 | Screwdriver, Torx, T8 |  |
| 1501802400 | Double head drill guide, Ø1.8& Ø2.4 |  |
| Product Code | Data 2632 | Length(mm) |
| 11124-022 | 4 holes | 22.5 |
| 11124-025 | 4 holes | 25 |
| 11124-027 | 4 holes | 27.5 |
| 11124-030 | 4 holes | 30 |
| 11124-032 | 4 holes | 32.5 |
| 11124-135 | 6 holes | 35 |
| 11124-137 | 6 holes | 37.5 |
| 11124-140 | 6 holes | 40 |
| 11124-142 | 6 holes | 42.5 |
| 11124-145 | 6 holes | 45 |
| PRODUCT CODE | PRODUCT NAME | |
| 1501803200 | Screw holder |  |
| 1501803300 | Plate holder |  |
| 1501803000 | Depth gauge, Ø2.0-Ø2.4, max 40mm |  |
| 1501803400 | Distracting hook, curved, 2 pcs |  |
| 1501803500 | Distracting hook, straight, 2 pcs |  |
| 1501803100 | Countersink drill Ø1.5-Ø2.4 |  |
| 1501802900 | Depth gauge, Ø1.3-Ø1.5, max 40mm |  |
| 1501803600 | Sharp hook |  |
| 1501803700 | Periosteal elevator, 3mm |  |
| 1501804000 | Handle, quick coupling |  |
| 1501802800 | Handle, for Torx screwdriver, quick coupling |  |
| 1501803800 | Flat forcep with point |  |
| Product Code | Data 2621 | Length(mm) |
| 11124-022 | 4 holes | 22.5 |
| 11124-025 | 4 holes | 25 |
| 11124-027 | 4 holes | 27.5 |
| 11124-030 | 4 holes | 30 |
| 11124-032 | 4 holes | 32.5 |
| 11124-135 | 6 holes | 35 |
| 11124-137 | 6 holes | 37.5 |
| 11124-140 | 6 holes | 40 |
| 11124-142 | 6 holes | 42.5 |
| 11124-145 | 6 holes | 45 |
| PRODUCT CODE | PRODUCT NAME | |
| 1502002800 | K-wire, Ø2.0*160mm, 2pcs |  |
| 1501420800 | Threaded guide wire, Ø1.5*150mm, 2pcs |  |
| 1509050100 | Drill bit, Ø2.0, AO connector, 2pcs |  |
| 1509052100 | Drill bit, Ø1.8, AO connector, 2pcs |  |
| 1500710600 | Depth gauge |  |
| 1502000800 | Concave file, large |  |
| 1502000900 | Convex file, large |  |
| 1502001000 | Concave file, small |  |
| 1502001100 | Convex file, small |  |
| 1502001300 | Osteotomy distractor, small |  |
| 1515710800 | Screwdriver, torx, T8, quick coupling |  |
| 1505710700 & 1502003000 | Screwdriver & screw holding clamp, T8 |  |
| 1502001800 | Double head drill guide, Ø1.8 & Ø2.0 |  |
| 1502001700 | Plate bender, 2pcs |  |
| 1502001400 | Threaded drill guide, 1.8, 2pcs |  |
| 1502001500 | Threaded drill guide, 2.0, 2pcs |  |
| 1505311400 | Quick coupling connector |  |
| 1505301400 | T-shaped handle |  |
| 1502002200 | Fore-foot implant case |  |
| 1502002300 | Mid-foot implant case |  |
| 1502002400 | 2.7/3.0mm screw case |  |
| Product Code | Data 2614 | Length(mm) |
| 11124-022 | 4 holes | 22.5 |
| 11124-025 | 4 holes | 25 |
| 11124-027 | 4 holes | 27.5 |
| 11124-030 | 4 holes | 30 |
| 11124-032 | 4 holes | 32.5 |
| 11124-135 | 6 holes | 35 |
| 11124-137 | 6 holes | 37.5 |
| 11124-140 | 6 holes | 40 |
| 11124-142 | 6 holes | 42.5 |
| 11124-145 | 6 holes | 45 |
| PRODUCT CODE | PRODUCT NAME | |
| 1502002800 | K-wire, Ø2.0*160mm, 2pcs |  |
| 1509052200 | AO drill bit, Ø2.3, 2pcs |  |
| 1500100900 | Depth gauge |  |
| 1502011800 | Double head drill guide, Ø2.3 & Ø2.3 |  |
| 1505710800 & 1502003100 | Screwdriver & screw holding clamp, T15 |  |
| 1502001200 | Osteotomy distractor, large |  |
| 1515700800 | Screwdriver, torx, T15, quick coupling |  |
| 1505311400 | Quick coupling connector |  |
| 1502001600 | 2.3 Threaded drill guide, 2pcs |  |
| 1502001700 | Plate bender, 2pcs |  |
| 1505301400 | T-shaped quick coupling handle |  |
| 1502002500 | 3.5mm screw case |  |
| 1502002600 | Ankle implant case |  |
| Product Code | Data 2619 | Length(mm) |
| 11124-022 | 4 holes | 22.5 |
| 11124-025 | 4 holes | 25 |
| 11124-027 | 4 holes | 27.5 |
| 11124-030 | 4 holes | 30 |
| 11124-032 | 4 holes | 32.5 |
| 11124-135 | 6 holes | 35 |
| 11124-137 | 6 holes | 37.5 |
| 11124-140 | 6 holes | 40 |
| 11124-142 | 6 holes | 42.5 |
| 11124-145 | 6 holes | 45 |
| PRODUCT CODE | PRODUCT NAME | |
| 1500700500 | Double head periosteal elevator, 3mm |  |
| 1500710500 | Double head periosteal elevator, 5mm |  |
| 1500701200 | Sharp hook, 2pcs |  |
| 1500701100 | Skin hook, 2pcs |  |
| 1500710700 | Retractor, medium |  |
| 1500720700 | Retractor, small |  |
| 1500700700 | Retractor, large |  |
| 1500100800 | Periosteal elevator, curved |  |
| 1500120800 | Periosteal elevator, flat |  |
| 1500701000 | Mini screw holder |  |
| 1515710400 | Torque spanner, 0.8NM |  |
| 1502000300 | Bone chisel, 20mm |  |
| 1502000400 | Bone chisel, 16mm |  |
| 1502000500 | Bone chisel, 10mm |  |
| 1502000600 | Bone chisel, 6mm |  |
| 1502000700 | Convex blade |  |
| 1502002700 | Bone chisel, 25mm |  |
| 1504600800 | Hammer |  |
| 1500810300 | Plate bender, 2pcs |  |
| 1500800400 | Plate bender with 3 points |  |
| 1500701800 | Plate cutter |  |
| 1500101200 | Reduction forceps with point |  |
| 1502000100 | Calcaneal distractor |  |
| 1502000200 | Pin retractor |  |
| Product Code | Data 2618 | Length(mm) |
| 11124-022 | 4 holes | 22.5 |
| 11124-025 | 4 holes | 25 |
| 11124-027 | 4 holes | 27.5 |
| 11124-030 | 4 holes | 30 |
| 11124-032 | 4 holes | 32.5 |
| 11124-135 | 6 holes | 35 |
| 11124-137 | 6 holes | 37.5 |
| 11124-140 | 6 holes | 40 |
| 11124-142 | 6 holes | 42.5 |
| 11124-145 | 6 holes | 45 |
| PRODUCT CODE | PRODUCT NAME | |
| 1503501400 | K-wire, 4pcs |  |
| 1503502100 | Drill bit, Ø4.3, quick coupling, 2pcs |  |
| 1503500500 | Screwdriver for preholding |  |
| 1503502200 | Tap, Ø5.0, quick coupling for 5.0 locking screw |  |
| 1503501700 | Drill bit, Ø4.3, for pulling, 2pcs |  |
| 1503501500 | Bone measuring device |  |
| 1503500600 | Screwdriver for extracting screws, 2pcs |  |
| 1503502300 | Guide wire puncture outfit, 2pcs |  |
| 1503501900 | Puncture outfit, 2pcs |  |
| 1503500400 | Threaded drill guide, Ø2.0, 2pcs |  |
| 1503510400 | Threaded drill guide, Ø4.3, 2pcs |  |
| 1503500800 | Depth gauge |  |
| 1503501200 | Wire guide, 2pcs |  |
| 1503501600 | Guide Sleeve, 2pcs |  |
| 1503502000 | Spanner |  |
| 1503500300 | Screwdriver for inserting screws |  |
| 1503500700 | Torque limited spanner,4NM |  |
| 1503501800 | Soft plug, 20pcs |  |
| 1503500900 | Opening wrench, SW10 |  |
| 1503501100 | Template, 2pcs |  |
| 1503501300 | T-shaped handle, quick coupling |  |
| 1503501000 | Guide wire targeting device |  |
| 1503500100 | Targeting device-femur, left |  |
| 1503500200 | Targeting device-femur, right |  |
| Product Code | Data 2617 | Length(mm) |
| 11124-022 | 4 holes | 22.5 |
| 11124-025 | 4 holes | 25 |
| 11124-027 | 4 holes | 27.5 |
| 11124-030 | 4 holes | 30 |
| 11124-032 | 4 holes | 32.5 |
| 11124-135 | 6 holes | 35 |
| 11124-137 | 6 holes | 37.5 |
| 11124-140 | 6 holes | 40 |
| 11124-142 | 6 holes | 42.5 |
| 11124-145 | 6 holes | 45 |
| PRODUCT CODE | PRODUCT NAME | |
| 1503501400 | K-wire, 4pcs |  |
| 1503502100 | Drill bit, Ø4.3, quick coupling, 2pcs |  |
| 1503500500 | Screwdriver for preholding |  |
| 1503502200 | Tap, Ø5.0, quick coupling for 5.0 locking screw |  |
| 1503501700 | Drill bit, for pulling, 2pcs |  |
| 1503501500 | Bone measuring device |  |
| 1503500600 | Screwdriver for extracting screws, 2pcs |  |
| 1503502300 | Guide wire puncture outfit, 2pcs |  |
| 1503501900 | Puncture outfit, 2pcs |  |
| 1503500400 | Threaded drill guide, Ø2.0, 2pcs |  |
| 1503510400 | Threaded drill guide, Ø4.3, 2pcs |  |
| 1503500800 | Depth gauge |  |
| 1503501200 | Wire guide, 1pcs |  |
| 1503501600 | Guide sleeve, 2pcs |  |
| 1503502000 | Spanner |  |
| 1503500300 | Screwdriver for inserting screws |  |
| 1503500700 | Torque limited spanner, 4NM |  |
| 1503501800 | Soft plug, 20pcs |  |
| 1503500900 | Opening wrench, SW10 |  |
| 1503501100 | Template, 2pcs |  |
| 1503501300 | T-shaped handle, quick coupling |  |
| 1503501000 | Guide wire targeting device |  |
| 1503600100 | Targeting device-femur, left |  |
| 1503600200 | Targeting device-femur, right |  |
| Product Code | Data 2616 | Length(mm) |
| 11124-022 | 4 holes | 22.5 |
| 11124-025 | 4 holes | 25 |
| 11124-027 | 4 holes | 27.5 |
| 11124-030 | 4 holes | 30 |
| 11124-032 | 4 holes | 32.5 |
| 11124-135 | 6 holes | 35 |
| 11124-137 | 6 holes | 37.5 |
| 11124-140 | 6 holes | 40 |
| 11124-142 | 6 holes | 42.5 |
| 11124-145 | 6 holes | 45 |
| PRODUCT CODE | PRODUCT NAME | |
| 1504000700 | Guide wire, threaded, Ø3.2*343, 2pcs |  |
| 1504001500 | Depth gauge, for medullary cavity |  |
| 1504001600 | Reamer shaft |  |
| 1501441300 | Screwdriver, for locking bolt, SW4.0 |  |
| 1504002800 | Screwdriver, for inserting compression screw, SW5.0 |  |
| 1504003200 | Drill bit, long, Ø4.0*327mm |  |
| 1504003600 | Screwdriver, for end cap, SW5.0 |  |
| 1504004200 | Tap, for lag screw |  |
| 1504002000 | Step drill bit, for lag screw, Ø11 |  |
| 1504002500 | Drill bit, for compression screw, Ø7.0 |  |
| 1504003300 | Drill bit, short, Ø4.0*187mm |  |
| 1504001300 | Medullary cavity resitter guide, Ø8.5 |  |
| 1504002400 | Starting drill bit, for compression screw, Ø7.0 |  |
| 1504002300 | Screwdriver, poly-axial, SW5.0 |  |
| 1504003400 | Poly-axial screwdriver, SW8.0 |  |
| 1504003100 | Depth gauge, for locking bolt |  |
| 1504002200 | Standard screwdriver, for inserting lag screw |  |
| 1504003800 | Guide wire stopper |  |
| 1504001100 | Reamer, for proximal end, Ø12.5 |  |
| 1504001800 | Guide wire sleeve, Ø4.0 |  |
| 1504003900 | Connecting bar, for medullary cavity resetter |  |
| 1504010600 | Extractor, short |  |
| 1504001700 | Guide wire sleeve, Ø3.2 |  |
| 1504002900 | Guide sleeve, Ø9.0, 2pcs |  |
| 1504003000 | Drill guide, Ø4.0, 2pcs |  |
| 1504001200 | Cannel reamer, 16mm |  |
| 1504001900 | Depth gauge, for lag screw |  |
| 1504004400 | Soft tissue seperator, Ø4.0 |  |
| 1504000600 | Extractor, long |  |
| 1501451300 | Screwdriver, SW4.0, for locking bolt |  |
| 1504002100 | Compression handle |  |
| 1504004100 | Mini connector |  |
| 1504000900 | Outer guide |  |
| 1504000500 | Connecting bolt, M11*1.75, 2pcs |  |
| 1504000800 | K-wire guide, multi holes |  |
| 1504004000 | Lag screw drill sleeve |  |
| 1504001000 | Handle, for inserting nail |  |
| 1504501100 | Sliding hammer |  |
| 1504004300 | Screwdriver, square |  |
| 1504505800 | Reamer, Ø8.5 |  |
| 1504515800 | Reamer, Ø9.0 |  |
| 1504525800 | Reamer, Ø9.5 |  |
| 1504535800 | Reamer, Ø10.0 |  |
| 1504555800 | Reamer, Ø11.0 |  |
| 1504565800 | Reamer, Ø11.5 |  |
| 1504575800 | Reamer, Ø12.0 |  |
| 1504585800 | Reamer, Ø12.5 |  |
| 1504595800 | Reamer, Ø13.0 |  |
| 1504003500 | Connecting bar, for extracting nail, M11-1.75 |  |
| 1504502700 | Wrench, SW11 |  |
| 1504002700 | Combined screwdriver, for inserting lag screw |  |
| 1504000200 | Targeting outrigger |  |
| 1504002600 | Substitute shaft, for compression screw |  |
| 1504004700 | Awl |  |
| 1504003700 | Drill guide, for depth measuring, Ø4.0 |  |
| 1504001400 | T-shaped handle |  |
| 1504000100 | Inserting handle |  |
| 1504505500 | Guide wire holder |  |
| 1504505100 | Guide wire, 4.0 ball tip, Ø2.5*1000mm |  |
| Product Code | Data 2615 | Length(mm) |
| 11124-022 | 4 holes | 22.5 |
| 11124-025 | 4 holes | 25 |
| 11124-027 | 4 holes | 27.5 |
| 11124-030 | 4 holes | 30 |
| 11124-032 | 4 holes | 32.5 |
| 11124-135 | 6 holes | 35 |
| 11124-137 | 6 holes | 37.5 |
| 11124-140 | 6 holes | 40 |
| 11124-142 | 6 holes | 42.5 |
| 11124-145 | 6 holes | 45 |
| PRODUCT CODE | PRODUCT NAME | |
| 1352522300 | Threaded guide wire, 2 pcs |  |
| 1504401400 | Drill bit, Ø3.0*200mm, 2 pcs |  |
| 1504401500 | Drill bit & slide limited device, Ø3.2*200mm, 2 pcs |  |
| 1504401200 | Holding shaft, hex |  |
| 1504403400 | Reamer, Ø6.5*335mm |  |
| 1504413400 | Reamer, Ø7.0*335mm |  |
| 1504423400 | Reamer, Ø7.3*335mm |  |
| 1504433400 | Reamer, Ø8.3*335mm |  |
| 1504401100 | Depth gauge |  |
| 1504403500 | Reamer, Ø10, for proximal end |  |
| 1504400800 | Soft tissue separator I |  |
| 1504400900 | Soft tissue separator II |  |
| 1504401000 | Soft tissue separator III |  |
| 1504402200 | Guide sleeve, Ø3.2 |  |
| 1504400400 | Protecting sleeve, Ø10 |  |
| 1504400600 | Protecting sleeve, Ø8 |  |
| 1504402100 | Positioning rod guide |  |
| 1504403700 | Grill guide, for K-wire |  |
| 1504401600 | Open wrench |  |
| 1504402400 | Extractor |  |
| 1504402700 | Guiding bar |  |
| 1504402300 | Template |  |
| 1504401700 | Screwdriver, hex, SW3.0 |  |
| 1504401800 | Wrench |  |
| 1504401900 | Positioning rod |  |
| 1504402000 | T-drill bit, Ø3.2 |  |
| 1504403600 | Sleeve, for reamer |  |
| 1504401300 | L shaped screwdriver, hex |  |
| 1504400700 | Inner guide sleeve, Ø6 |  |
| 1504400500 | Inner guide sleeve, Ø8 |  |
| 1504402500 | Connecting bolt, for main nail |  |
| 1504400300 | Proximal outrigger |  |
| 1504402800 | Position limited block |  |
| 1504402600 | Multi-axial connector |  |
| 1504402900 | Locking bolt, for outrigger, 2pcs |  |
| 1504400100 | Outrigger handle |  |
| 1504400200 | Distal outrigger |  |
| 1504403000 | Guide wire, Ø2*660, 2pcs |  |
| Product Code | Data 2634 | Length(mm) |
| 11124-022 | 4 holes | 22.5 |
| 11124-025 | 4 holes | 25 |
| 11124-027 | 4 holes | 27.5 |
| 11124-030 | 4 holes | 30 |
| 11124-032 | 4 holes | 32.5 |
| 11124-135 | 6 holes | 35 |
| 11124-137 | 6 holes | 37.5 |
| 11124-140 | 6 holes | 40 |
| 11124-142 | 6 holes | 42.5 |
| 11124-145 | 6 holes | 45 |
| PRODUCT CODE | PRODUCT NAME | |
| 1504600400 | Guide wire, Ø1.5*300, 2pcs |  |
| 1500720100 | Drill bit, Ø1.5, 2pcs |  |
| 1505710100 | Drill bit, Ø2.0, 2pcs |  |
| 1504601300 | Ruler |  |
| 1504600600 | Reamer, for proximal end |  |
| 1500720300 | Screwdriver, quick coupling, square |  |
| 1504601100 | Depth gauge |  |
| 1504601000 | Extractor, for main nail |  |
| 1504600200 | Connecting bolt |  |
| 1504601400 | Screwdriver, hex, SW2.0 |  |
| 1501410400 | Screwdriver, hex |  |
| 1504601200 | Awl |  |
| 1504600800 | Hammer |  |
| 1504600300 | Reamer, Ø3.5 |  |
| 1504610300 | Reamer, Ø4.0 |  |
| 1504620300 | Reamer, Ø4.5 |  |
| 1500702000 | Handle, quick coupling |  |
| 1504600100 | Outrigger, for fibular |  |
| Product Code | Data 2620 | Length(mm) |
| 11124-022 | 4 holes | 22.5 |
| 11124-025 | 4 holes | 25 |
| 11124-027 | 4 holes | 27.5 |
| 11124-030 | 4 holes | 30 |
| 11124-032 | 4 holes | 32.5 |
| 11124-135 | 6 holes | 35 |
| 11124-137 | 6 holes | 37.5 |
| 11124-140 | 6 holes | 40 |
| 11124-142 | 6 holes | 42.5 |
| 11124-145 | 6 holes | 45 |
| PRODUCT CODE | PRODUCT NAME | |
| 1509042200 | Loc drill bit Ø2.8, 2pcs |  |
| 1504700400 | Wrench, Ø4.5 |  |
| 1504700100 | Straight impactor |  |
| 1504700200 | Beveled impactor |  |
| 1504700900 | Rotatable wrench |  |
| 1504700500 | Awl |  |
| 1504701000 | Triangle wrench |  |
| 1504501200 | Fixed hammer |  |
| 1504700800 | Nail cutter |  |
| 1504700700 | Inserter |  |
| 1504700600 | Nail holder |  |
| Product Code | Data 2624 | Length(mm) |
| 11124-022 | 4 holes | 22.5 |
| 11124-025 | 4 holes | 25 |
| 11124-027 | 4 holes | 27.5 |
| 11124-030 | 4 holes | 30 |
| 11124-032 | 4 holes | 32.5 |
| 11124-135 | 6 holes | 35 |
| 11124-137 | 6 holes | 37.5 |
| 11124-140 | 6 holes | 40 |
| 11124-142 | 6 holes | 42.5 |
| 11124-145 | 6 holes | 45 |
| PRODUCT CODE | PRODUCT NAME | |
| 1504802500 | Threaded K-wire Ø2.5*320, 3pcs |  |
| 1504802600 | Triangle K-wire Ø2.5*320, 3pcs |  |
| 1504801400 | Drill bit, for positioning rod, Ø5.2 |  |
| 1504811900 | Drill bit & slide limited device, Ø4.0, 2pcs |  |
| 1504802800 | Step drill bit & slide limited device, Ø6.4 |  |
| 1504505700 | Reamer shaft, Ø6.4 |  |
| 1501441300 | Screwdriver, for locking bolt, SW4.0 |  |
| 1504802000 | Depth gauge, for locking bolt |  |
| 1504800200 | Reamer & slide limited device, for proximal end |  |
| 1504811300 | Soft tissue separator, long |  |
| 1504802200 | Screwdriver, ball head, for connecting bolt |  |
| 1504801800 | Drill guide, for locking screw, 2pcs |  |
| 1504800700 | Extractor |  |
| 1504802700 | Depth gauge, for guide wire, Ø2.5*320 |  |
| 1504801300 | Soft tissue seperator, short |  |
| 1504811800 | Stabilizing rod guide |  |
| 1504801000 | Connecting guide bar, 180-240 |  |
| 1504801100 | Distal guide bar, 320-440 |  |
| 1504811000 | Proximal guide bar |  |
| 1501451300 | Connecting rod |  |
| 1504505800 | Reamer, Ø8.5 |  |
| 1504515800 | Reamer, Ø9.0 |  |
| 1504525800 | Reamer, Ø9.5 |  |
| 1504535800 | Reamer, Ø10.0 |  |
| 1504545800 | Reamer, Ø10.5 |  |
| 1504555800 | Reamer, Ø11.0 |  |
| 1504565800 | Reamer, Ø11.5 |  |
| 1504575800 | Reamer, Ø12.0 |  |
| 1504585800 | Reamer, Ø12.5 |  |
| 1504595800 | Reamer, Ø13.0 |  |
| 1504800500 | Connecting bolt, 2pcs |  |
| 1504802400 | Connecting bar, for extracting the main nail |  |
| 1504800100 | Skin protector |  |
| 1504800800 | Connecting screw, for handle, 2pcs |  |
| 1504810800 | Connecting screw, for guide bar, 3pcs |  |
| 1504801700 | Position limited block |  |
| 1504801200 | Distal outrigger |  |
| 1504504700 | Cannulated awl |  |
| 1504800900 | Screwdriver, for connecting screw, SW5 |  |
| 1504800300 | Screwdriver, for slide limited device,SW3.0 |  |
| 1504821800 | Drill guide, for positioning rod, Ø5.2 |  |
| 1504841800 | Drill guide, for K-wire, Ø2.5 |  |
| 1504851800 | Drill guide, for step drill bit, Ø6.4 |  |
| 1504861800 | Drill guide sleeve, for locking screw, Ø4.0, 2pcs |  |
| 1504800600 | Screwdriver, for connecting bolt, SW6.5 |  |
| 1504801500 | T-drill bit, Ø5.2 |  |
| 1504801600 | Positioning rod |  |
| 1504802300 | Screwdriver, for end cap, SW5/M3.5 |  |
| 1504505200 | Wire guide |  |
| 1504001400 | T-shaped handle |  |
| 1504000100 | Inserting handle |  |
| 1504505500 | Guide wire holder |  |
| 1504505100 | Guide wire, 4.0 ball tip, Ø2.5*1000mm |  |
| Product Code | Data 2612 | Length(mm) |
| 11124-022 | 4 holes | 22.5 |
| 11124-025 | 4 holes | 25 |
| 11124-027 | 4 holes | 27.5 |
| 11124-030 | 4 holes | 30 |
| 11124-032 | 4 holes | 32.5 |
| 11124-135 | 6 holes | 35 |
| 11124-137 | 6 holes | 37.5 |
| 11124-140 | 6 holes | 40 |
| 11124-142 | 6 holes | 42.5 |
| 11124-145 | 6 holes | 45 |
| PRODUCT CODE | PRODUCT NAME | |
| 1504900700 | Threaded guide wire, Ø3.2*300, 3pcs |  |
| 1504902700 | Depth gauge, for locking bolt |  |
| 1504515700 | Reamer shaft, Ø7.5, 2pcs |  |
| 1504912600 | Drill bit & slide limited device, Ø3.2*250, 2pcs |  |
| 1504902600 | Drill bit & slide limited device, Ø4.0, 3pcs |  |
| 1504901700 | Drill bit for positioning rod, Ø5.2 |  |
| 1504900600 | Drill bit for positioning rod, Ø12 / Ø3.2 |  |
| 1504902900 | Screwdriver, quick coupling, for locking bolt, SW3.5 |  |
| 1504903300 | Screwdriver, hex, for the end cap, SW3.5 |  |
| 1504901400 | Guiding bar, for sliding hammer |  |
| 1504902400 | Soft tissue separator, Ø3.2 |  |
| 1504901300 | Small wrench, Ø4 |  |
| 1504901500 | Guiding bar |  |
| 1504900900 | Connecting screw, 2pcs |  |
| 1504903100 | Compression screw, Ø4/M6/SW6.5 |  |
| 1504912400 | Drill guide, Ø3.2 |  |
| 1504902200 | Soft tissue separator, Ø8 |  |
| 1504902300 | Outer sleeve, for positioning rod |  |
| 1504932300 | Cancellous locking bolt guide, Ø8.5 |  |
| 1504922300 | Cortex locking bolt guide, Ø8.0 |  |
| 1504506100 | Reamer, Ø7.5 |  |
| 1504516100 | Reamer, Ø8.0 |  |
| 1504505800 | Reamer, Ø8.5 |  |
| 1504515800 | Reamer, Ø9.0 |  |
| 1504525800 | Reamer, Ø9.5 |  |
| 1504535800 | Reamer, Ø10.0 |  |
| 1504545800 | Reamer, Ø10.5 |  |
| 1504555800 | Reamer, Ø11.0 |  |
| 1504565800 | Reamer, Ø11.5 |  |
| 1504575800 | Reamer, Ø12.0 |  |
| 1504904700 | Cannulated awl, Ø12/ Ø4 |  |
| 1504903400 | Connecting bar, for extracting main nail, M8*1 |  |
| 1504502700 | Wrench, SW11 |  |
| 1504900200 | Ruler, for developed image |  |
| 1504911600 | Locking screw, for distal outrigger, M11*1.5, 2pcs |  |
| 1504921600 | Locking screw, for proximal outrigger, M6, 2pcs |  |
| 1504901600 | Locking screw, for connecting bar, M8*1, 3pcs |  |
| 1504902000 | Position limited block |  |
| 1504900100 | Skin protector |  |
| 1504901800 | T-drill bit, Ø5.2 |  |
| 1504902500 | Drill guide, Ø4.0 |  |
| 1504505300 | Locking screw wrench, hex, SW5 |  |
| 1504505400 | Slide tissue device wrench, SW3.0 |  |
| 1504912300 | Position rod guide, Ø5.2 |  |
| 1504505200 | Ball tip wire guide |  |
| 1504902800 | T-wrench, SW3.5 |  |
| 1504901000 | Connecting screw wrench, SW6.5 |  |
| 1504903200 | Poly-axial wrench, SW6.5 |  |
| 1504901900 | T-handle stabilizing rod |  |
| 1504900400 | Proximal rigid reamer guide, Ø12 |  |
| 1504901100 | Sliding hammer, M8*1 |  |
| 1504501100 | Sliding hammer |  |
| 1504900800 | Handle |  |
| 1504913000 | Proximal outrigger 45° |  |
| 1504902100 | Position distal outrigger |  |
| 1504903000 | Proximal outrigger |  |
| 1504901200 | T-shaped quick coupling handle |  |
| 1504900300 | Guide wire holding clamp |  |
| 1504900500 | Cannulated awl ( Ø12/ Ø3.2) |  |
| 1504505100 | Ball tip guide wire ( Ø2.5/ Ø4) |  |
| Product Code | Data 2622 | Length(mm) |
| 11124-022 | 4 holes | 22.5 |
| 11124-025 | 4 holes | 25 |
| 11124-027 | 4 holes | 27.5 |
| 11124-030 | 4 holes | 30 |
| 11124-032 | 4 holes | 32.5 |
| 11124-135 | 6 holes | 35 |
| 11124-137 | 6 holes | 37.5 |
| 11124-140 | 6 holes | 40 |
| 11124-142 | 6 holes | 42.5 |
| 11124-145 | 6 holes | 45 |
| PRODUCT CODE | PRODUCT NAME | |
| 1504500700 | Parallel guide |  |
| 1504503900 | Threaded K-wire, Ø3.2*400, 4pcs |  |
| 1504503700 | K-wire with hook |  |
| 1504801400 | Drill bit, for stabilizing rod |  |
| 1505001200 | Reamer shaft, 2pcs |  |
| 1504504900 | Drill bit, Ø4.0, 2pcs |  |
| 1504502300 | Cannulated drill bit&Slide Limited device, for proximal end |  |
| 1504502000 | Cleaning pin, 2pcs |  |
| 1504502200 | Cleaning brush, 2pcs |  |
| 1501441300 | Screwdriver, for locking bolt, SW4.0 |  |
| 1504501700 | Depth gauge, for locking bolt |  |
| 1504503500 | Main nail extractor |  |
| 1504502500 | Cannulated drill bit, for proximal cortex bone |  |
| 1504501600 | Pin guide, Ø4, 2pcs |  |
| 1504503300 | Soft tissue protecting sleeve, Ø3.2 |  |
| 1504503200 | K-wire guide, Ø3.2 |  |
| 1504502400 | Reamer, for proximal end |  |
| 1504501500 | Drill bit guide, Ø4, for locking bolt, 2pcs |  |
| 1504501400 | Drill bit guide sleeve, king bolt, 2pcs |  |
| 1505001100 | Soft tissue seperator |  |
| 1504505800 | Reamer, Ø8.5 |  |
| 1504515800 | Reamer, Ø9.0 |  |
| 1504525800 | Reamer, Ø9.5 |  |
| 1504535800 | Reamer, Ø10.0 |  |
| 1504545800 | Reamer, Ø10.5 |  |
| 1504555800 | Reamer, Ø11.0 |  |
| 1504565800 | Reamer, Ø11.5 |  |
| 1504575800 | Reamer, Ø12.0 |  |
| 1504585800 | Reamer, Ø12.5 |  |
| 1504595800 | Reamer, Ø13.0 |  |
| 1504504200 | Connecting bar, for extracting blade |  |
| 1504502100 | Cannulated screwdriver & extension rod, for inserting end cap |  |
| 1504515000 | Positioning rod guide sleeve |  |
| 1504501300 | Inserter, for blade |  |
| 1501451300 | Connecting rod |  |
| 1504503800 | Screwdriver, poly-axial, for end cap, hex, SW4.0 |  |
| 1504501100 | Sliding hammer |  |
| 1505000700 | Guide bar |  |
| 1505000300 | Threaded guide |  |
| 1504512800 | Knocking shaft |  |
| 1504503100 | Depth gauge, for blade |  |
| 1504503400 | Key for PFNA blade |  |
| 1504502700 | Wrench, hex, SW11 |  |
| 1505000400 | Connecting bolt, 2pcs |  |
| 1505000900 | Connecting screw, for guide bar, 3pcs |  |
| 1505001000 | Connecting screw, for distal outtrigger, 2pcs |  |
| 1504504100 | Soft tissue protector |  |
| 1504501800 | Screwdriver, for connecting bolt, hex, SW8.0 |  |
| 1504511800 | Screwdriver, poly-axial, for connecting bolt |  |
| 1504506000 | T-handle positioning rod |  |
| 1504501000 | Blade extractor |  |
| 1504505200 | Pin guide |  |
| 1504504800 | T-drill bit, Ø5.2 |  |
| 1504505300 | Screwdriver, connecting screw, hex, SW5 |  |
| 1504505400 | Screwdriver, for slide limited device, SW3 |  |
| 1504505900 | Position limited block |  |
| 1505000800 | Distal positioning outrigger |  |
| 1504504700 | Cannulated awl |  |
| 1504500900 | T-handle, for reamer, quick coupling |  |
| 1504505000 | Positioning rod guide, Ø5.2/Ø8.1 |  |
| 1504500700 | Parallel guide |  |
| 1504506800 | K-wire guide, multi-guide |  |
| 1505000100 | Proximal guide bar |  |
| 1505000500 | Guide bar, static, 170/240 |  |
| 1505000600 | Connecting guide bar, for extra-long main nail |  |
| 1504504000 | Template |  |
| 1505000200 | Handle, connecting with proximal end of main nail |  |
| 1504505500 | Guide wire holder |  |
| 1504505100 | Ball tip guide wire |  |
| Product Code | Data 2635 | Length(mm) |
| 11124-022 | 4 holes | 22.5 |
| 11124-025 | 4 holes | 25 |
| 11124-027 | 4 holes | 27.5 |
| 11124-030 | 4 holes | 30 |
| 11124-032 | 4 holes | 32.5 |
| 11124-135 | 6 holes | 35 |
| 11124-137 | 6 holes | 37.5 |
| 11124-140 | 6 holes | 40 |
| 11124-142 | 6 holes | 42.5 |
| 11124-145 | 6 holes | 45 |
| PRODUCT CODE | PRODUCT NAME | |
| 1505300300 | Threaded pin, for trephine, Ø3.5 |  |
| 1505301000 | Sharp hook |  |
| 1505310300 | Threaded pin, for trephine, Ø4.5 |  |
| 1505301100 | Awl |  |
| 1505320300 | Threaded pin, for trephine, Ø6.5 |  |
| 1505300800 | Alloy drill bit, Ø4.0 |  |
| 1505310800 | Alloy drill bit, Ø6.0 |  |
| 1505300100 | Skid screw extractor, 2.5, thin |  |
| 1505310100 | Skid screw extractor, 2.5, thick |  |
| 1505320100 | Skin screw extractor, 3.5, thick |  |
| 1505300200 | Trephine, Ø3.5 |  |
| 1505310200 | Trephine, Ø4.5 |  |
| 1505320200 | Trephine, Ø6.5 |  |
| 1505300400 | Handle, for trephine, Ø3.5 |  |
| 1505310400 | Handle, for trephine, Ø4.5 |  |
| 1505320400 | Handle, for trephine, Ø6.5 |  |
| 1505300500 | Broken screw extractor, Ø3.5 |  |
| 1505310500 | Broken screw extractor, Ø4.5 |  |
| 1505320500 | Broken screw extractor, Ø6.5 |  |
| 1505300600 | Screwdriver, SW2.5 |  |
| 1505310600 | Screwdriver, SW3.5 |  |
| 1505320600 | Screwdriver, SW4.0 |  |
| 1505300700 | Screwdriver, torx, 3.8 |  |
| 1505320700 | Screwdriver, torx, 4.4 |  |
| 1505300900 | Osteotome |  |
| 1505301500 | Handle, quick coupling |  |
| 1505301300 | Broken screw extractor |  |
| 1505301200 | Screw extractor |  |
| 1505301400 | T-shaped handle, quick coupling |  |
| 1505301700 | T-shaped handle |  |
| 1505301600 | Aluminum case |  |
| Product Code | Data 2642 | Length(mm) |
| 11124-022 | 4 holes | 22.5 |
| 11124-025 | 4 holes | 25 |
| 11124-027 | 4 holes | 27.5 |
| 11124-030 | 4 holes | 30 |
| 11124-032 | 4 holes | 32.5 |
| 11124-135 | 6 holes | 35 |
| 11124-137 | 6 holes | 37.5 |
| 11124-140 | 6 holes | 40 |
| 11124-142 | 6 holes | 42.5 |
| 11124-145 | 6 holes | 45 |
| PRODUCT CODE | PRODUCT NAME | |
| 1505401200 | Threaded Guide Pin Ø2.0*150 |  |
| 1505400100 | Aiming Module Locator |  |
| 1505400200 | Aiming Module Ø3.5 |  |
| 1505400300 | Aiming Module Ø5.0 |  |
| 1505400400 | Guide Pin Ø2.7*200 |  |
| 1505400500 | Osteotomy Locator |  |
| 1500111100 | Curved Reduction Pliers |  |
| 1505401300 | LCP Guide 3.0 |  |
| 1505401400 | LCP Guide 4.3 |  |
| 1505401100 | Reset Sleeve 4.2/2.8 |  |
| 1505400600 | Guide Pin Gauge Ø2.7 |  |
| 1500710800 | T15 Fixed Torx Screwdriver |  |
| 1500810800 | T25 Fixed Torx Screwdriver |  |
| 1515700800 | T15 Quick Change Torx Screwdriver (AO) |  |
| 1515800800 | T25 Quick Change Torx Screwdriver (AO) |  |
| 1515800500 | Lower Limb Torque Wrench 3.5N (AO) |  |
| 1515700400 | Upper Limb Torque Wrench 3.5N (AO) |  |
| 1509050200 | Ao Bone Drill Ø2.5*150 |  |
| 1509054900 | Ao Bone Drill Ø2.8*200 & Limiter |  |
| 1509050400 | Ao Bone Drill Ø3.2*150 |  |
| 1509055000 | Ao Bone Drill Ø4.3*230 & Limiter |  |
| 1500181000 | Depth Gauge (Upper Limb) |  |
| 1500380600 | Depth Gauge (Lower Limb) |  |
| 1500111300 | Self-Centering Rongeur (Lower Limb) |  |
| 1500120600 | Drill Guide (Ø2.5&HA3.5) |  |
| 1500380200 | Drill Guide (Ø3.2&HA4.5) |  |
| 1510100500 | Tap HA3.5 (Ao) |  |
| 1510110500 | Tap HA4.5 (Ao) |  |
| 1505400800 | Triangular Positioning Plate 90°/50°/40° |  |
| 1505400900 | Triangular Positioning Plate 80°/70°/30° |  |
| 1505401000 | Triangular Positioning Plate 100°/60°/20° |  |
| 1505400700 | Internal Shift Locator |  |
| 1505301400 | T-Type Quick Change Handle |  |
| Product Code | Data 2641 | Length(mm) |
| 11124-022 | 4 holes | 22.5 |
| 11124-025 | 4 holes | 25 |
| 11124-027 | 4 holes | 27.5 |
| 11124-030 | 4 holes | 30 |
| 11124-032 | 4 holes | 32.5 |
| 11124-135 | 6 holes | 35 |
| 11124-137 | 6 holes | 37.5 |
| 11124-140 | 6 holes | 40 |
| 11124-142 | 6 holes | 42.5 |
| 11124-145 | 6 holes | 45 |
| PRODUCT CODE | PRODUCT NAME | |
| 1509041400 | Bone Drill Ø1.8*110 |  |
| 1509041300 | Bone Drill Ø1.7*115 |  |
| 1506300800 | Drill Guide Ø1.8/HA2.4 |  |
| 1515710400 | Torque Wrench 0.8N |  |
| 1506300900 | HA2.4 Locking Tap |  |
| 1506301000 | HA2.4 Cortical Tap |  |
| 1505710300 | Thread Guide Ø2.0 |  |
| 1500710600 | Extended Mini Depth Gauge |  |
| 1500702000 | Quick Change Handle |  |
| 1506301200 | Skeletal Guide |  |
| 1510182600 | Quick change Torx Screwdriver |  |
| 1500182000 | Locking Nail Holder |  |
| 1505710700 | T8 Fixed Torx Screwdriver |  |
| Product Code | Data 2640 | Length(mm) |
| 11124-022 | 4 holes | 22.5 |
| 11124-025 | 4 holes | 25 |
| 11124-027 | 4 holes | 27.5 |
| 11124-030 | 4 holes | 30 |
| 11124-032 | 4 holes | 32.5 |
| 11124-135 | 6 holes | 35 |
| 11124-137 | 6 holes | 37.5 |
| 11124-140 | 6 holes | 40 |
| 11124-142 | 6 holes | 42.5 |
| 11124-145 | 6 holes | 45 |
| PRODUCT CODE | PRODUCT NAME | |
| 1350801500 | K-wire, Ø0.8*150, 2pcs |  |
| 1352002500 | K-wire, Ø2.0*250, 2pcs |  |
| 1501410800 | K-wire, Ø1.0*150, 2pcs |  |
| 1501420800 | K-wire, Ø1.5*150, 2pcs |  |
| 1506400100 | Cannulated drill bit, Ø2.7, 2pcs |  |
| 1506410100 | Cannulated drill bit, Ø3.5, 2pcs |  |
| 1506440100 | Cannulated drill bit, Ø4.6, 2pcs |  |
| 1506400500 | Cannulated drill bit, Ø2.0, 2pcs |  |
| 1506410500 | Cannulated drill bit, Ø2.2, 2pcs |  |
| 1506400400 | Depth gauge, for guide wire |  |
| 1501430700 | Depth gauge, Ø2.5, for guide wire |  |
| 1506410200 | Cannulated screwdriver, SW1.5 |  |
| 1506411200 | Cannulated screwdriver, SW2.0 |  |
| 1506421200 | Cannulated screwdriver, SW2.5 |  |
| 1506431200 | Cannulated screwdriver, SW3.0 |  |
| 1506441200 | Cannulated screwdriver, SW3.5 |  |
| 1506400300 | Drill guide, Ø2.0 |  |
| 1506410300 | Drill guide, Ø2.2 |  |
| 1506420300 | Drill guide, Ø2.7 |  |
| 1506430300 | Drill guide, Ø3.5 |  |
| 1506440400 | Drill guide, Ø4.6 |  |
| Product Code | Data 2639 | Length(mm) |
| 11124-022 | 4 holes | 22.5 |
| 11124-025 | 4 holes | 25 |
| 11124-027 | 4 holes | 27.5 |
| 11124-030 | 4 holes | 30 |
| 11124-032 | 4 holes | 32.5 |
| 11124-135 | 6 holes | 35 |
| 11124-137 | 6 holes | 37.5 |
| 11124-140 | 6 holes | 40 |
| 11124-142 | 6 holes | 42.5 |
| 11124-145 | 6 holes | 45 |
| PRODUCT CODE | PRODUCT NAME | |
| 1505710100 | Drill bit, Ø2.0 |  |
| 1500720300 | Screwdriver, Square, quick coupling |  |
| 1500740300 | Screwdriver, Torx, quick coupling, 2pcs |  |
| 1500700600 | Mini depth gauge |  |
| 1500710700 | Mini retractor |  |
| 1506900100 | Drill guide |  |
| 1506900200 | Plate holder |  |
| 1500702000 | Straight handle |  |
| 1506900300 1506910300 | Plate bender, left Plate bender, right |  |
| Product Code | Data 2638 | Length(mm) |
| 11124-022 | 4 holes | 22.5 |
| 11124-025 | 4 holes | 25 |
| 11124-027 | 4 holes | 27.5 |
| 11124-030 | 4 holes | 30 |
| 11124-032 | 4 holes | 32.5 |
| 11124-135 | 6 holes | 35 |
| 11124-137 | 6 holes | 37.5 |
| 11124-140 | 6 holes | 40 |
| 11124-142 | 6 holes | 42.5 |
| 11124-145 | 6 holes | 45 |
| PRODUCT CODE | PRODUCT NAME | |
| 1351021500 | Threaded Kirschner Wire (Ø1.0*150) |  |
| 1501410800 | Triangle Kirschner Wire (Ø1.0*150) |  |
| 1501411000 | Clean Pin (Ø1.0*180) |  |
| 1507400100 | Drill Sleeve (Ø2.0 / Ø1.0) |  |
| 1507400200 | Guide Pin Measuring Gauge (Ø1.0) |  |
| 1509053900 | Cannulated Drill bit (Ø2.0) |  |
| 1507400300 |
Compression Handle for wrench |  |
| 1501802800 | Quick Connecting Handle |  |
| 1507400400 | Hollow Cross Screwdriver with Scale(T8) |  |
| 1501805200 | Quick Coupling Screwdriver (Torx) |  |
| 1500701000 | Screw Holder |  |
| 1507400500 | Screwdriver Compression Sleeve (2.4) |  |
| 1507400600 | Screwdriver Compression Sleeve (3.0) |  |
| 1507400700 | Ø2.4 Screw Case |  |
| 1507400800 | Ø3.0 Screw Case |  |
| Product Code | Data 2637 | Length(mm) |
| 11124-022 | 4 holes | 22.5 |
| 11124-025 | 4 holes | 25 |
| 11124-027 | 4 holes | 27.5 |
| 11124-030 | 4 holes | 30 |
| 11124-032 | 4 holes | 32.5 |
| 11124-135 | 6 holes | 35 |
| 11124-137 | 6 holes | 37.5 |
| 11124-140 | 6 holes | 40 |
| 11124-142 | 6 holes | 42.5 |
| 11124-145 | 6 holes | 45 |
| PRODUCT CODE | PRODUCT NAME | |
| 1507600100 | Threaded k-wire (Ø1.6*220) |  |
| 1507600200 | Guide sleeve (Ø9.5/7.0) |  |
| 1507610200 | Guide sleeve (Ø7.0/3.2) |  |
| 1507620200 | Guide sleeve (Ø3.2/1.6) |  |
| 1507630200 | Trocar (Ø1.6) |  |
| 1507600300 | Guide pin measuring gauge (Ø1.6) |  |
| 1507600400 | Hollow quick drill (Ø3.2/1.7) |  |
| 1507600500 | Hollow countersink drill (Ø4.5) |  |
| 1507600600 | Compression sleeve (Ø4.5) |  |
| 1507600700 | Compression sleeve (Ø4.5) |  |
| 1507600800 | Compression handle (Ø4.5) |  |
| 1507600900 | Fast handle (Ø4.5) |  |
| 1507601000 | Screwdriver with handle (T15) |  |
| 1507601100 | Screw holder |  |
| 1507601200 | Clean pin (Ø1.6) |  |
| 1507601300 | Screw case |  |
| Product Code | Data 2633 | Length(mm) |
| 11124-022 | 4 holes | 22.5 |
| 11124-025 | 4 holes | 25 |
| 11124-027 | 4 holes | 27.5 |
| 11124-030 | 4 holes | 30 |
| 11124-032 | 4 holes | 32.5 |
| 11124-135 | 6 holes | 35 |
| 11124-137 | 6 holes | 37.5 |
| 11124-140 | 6 holes | 40 |
| 11124-142 | 6 holes | 42.5 |
| 11124-145 | 6 holes | 45 |
| PRODUCT CODE | PRODUCT NAME | |
| 1507700100 | Threaded k-wire (Ø2.8*300) |  |
| 1507700200 | Guide (Ø12.0/8.5) |  |
| 1507710200 | Guide (Ø8.5/2.8) |  |
| 1507720200 | Guide (Ø15.5/13.0) |  |
| 1507730200 | Trocar (Ø2.8) |  |
| 1507700300 | Guide pin measuring gauge (Ø2.8) |  |
| 1507700400 | Hollow quick drill (Ø5*300) |  |
| 1507700500 | Hollow countersink drill (Ø6.5) |  |
| 1507700600 | Compression sleeve (Ø6.5) |  |
| 1507700700 | Compression sleeve (Ø6.5) |  |
| 1507700800 | Compression handle (Ø6.5) |  |
| 1507700900 | Pressure casing accessories (Ø6.5) |  |
| 1507701000 | Hollow hexagon screwdriver (SW4.0) |  |
| 1507701100 | Clean pin (Ø2.8) |  |
| 1507701200 | T-shaped hollow screw tap (Ø6.5) |  |
| 1507701300 | Screw case |  |
| Product Code | Data 2636 | Length(mm) |
| 11124-022 | 4 holes | 22.5 |
| 11124-025 | 4 holes | 25 |
| 11124-027 | 4 holes | 27.5 |
| 11124-030 | 4 holes | 30 |
| 11124-032 | 4 holes | 32.5 |
| 11124-135 | 6 holes | 35 |
| 11124-137 | 6 holes | 37.5 |
| 11124-140 | 6 holes | 40 |
| 11124-142 | 6 holes | 42.5 |
| 11124-145 | 6 holes | 45 |
